| V-Belt & Tensioner Kit for 04-10 Sonata Tiburon Tucson Optima Sportage 2.7L⭐⭐⭐⭐⭐ | B:36 mm; (Grease) Lubrication Speed:3300 r/min; B2:16 mm; d:105 mm; Basic static load rating (C0):241 kN; Basic dynamic load rating (C):201 kN; Weight:4,51 Kg; Bore Diameter (mm):105; Size (mm):105x190x36; Bearing number:NH221 E; B1:10 mm; C:36 mm; Width (mm):36; Fw:126 mm; Outer Diameter (mm):190; D:190 mm; |
| Timing Belt Tensioner Hydraulic for Honda Accord Acura V6 Engine 14520-RCA-A01 | da min:35 mm; Fatigue limit load, Cu:0.51 kN; d1:37.9 mm; f0:13.8; Characteristic outer ring frequency, BPF0:3.57 Hz; D1:55.1 mm; Size (mm):30x62x16; Characteristic rolling element frequency, BSF:4.62 Hz; C:16,000 mm; B:16,000 mm; Nlim:7,600 rpm; Static load, C0:11.3 kN; Width (mm):16,000; Da max:57 mm; Mass:0.2 kg; Radial clearance class:C3; da max:37.9 mm; Min operating temperature, Tmin:-40 °C; |
| V6 Trucks TIMING BELT+WATER PUMP KIT Hydraulic Ten Genuine +OE Parts FOR TOYOTA | B:2,5 mm; r min.:0,1 mm; Category:Roller Bearings; da max:8,1 mm; Basic static load rating (C0):0,269 kN; Outer Diameter (mm):11; (Oil) Lubrication Speed:47 000 r/min; C:2,5 mm; Bore Diameter (mm):7; Basic dynamic load rating (C):0,555 kN; Da max.:10,2 mm; ra max.:0,1 mm; Inventory:0.0; Minimum Buy Quantity:N/A; Size (mm):7x11x2.5; Weight:0,67 Kg; D:11 mm; (Grease) Lubrication Speed:40 000 r/min; da min.:7,8 mm; |
| For Honda CR-V Accesory Belt Tensioner 2002-2014 Automatic Part Number: 89321 | Width (mm):28; d:30 mm; Bore Diameter (mm):30; Size (mm):30x72x28; D:72 mm; Outer Diameter (mm):72; B:28 mm; Bearing number:10/330PZ; |
| Set of 2 Belt Tensioner Assembly Fit Toyota Camry 2010-2011 | Dynamic Load Rating (kN):630; Seals or Shields:Open Type; D:225mm; Reference Speed Rating (r/min):2210; Limiting Speed Rating (r/min):3400; d:150mm; Cage Type:Plastic; Fatigue Load Rating (kN):85; Clearance:C4; Availability:In Stock; Static Load Rating (kN):880; B:56mm; SKU:23030-e1-tvpb-c4-fag; Weight:0.02 KGS; |
| Premium Belt Tensioner Assembly for Acura 2009-2014 TL TSX RDX 3.5 3.7 V6 38341 | SKU:7305beat85sul-nsk; Cage Type:Plastic; Weight:0.24 KGS; B:17mm; Static Load Rating (kN):14.9; D:62mm; Seals or Shields:Open Type; Clearance:Standard; Availability:In Stock; Dynamic Load Rating (kN):25.9; d:25mm; |
| Serpentine Belt Tensioner w/ Pulley NEW for Audi A4 A6 S4 VW Passat V6 | Calculation factor - f2D:1.05; Preload class D:53 N/micron; r1,2 min.:0.6 mm; d2:24.1 mm; Calculation factor - f0:8.5; Ball - Dw:7.144 mm; Fatigue load limit Pu:0.176 kN; D2:34.4 mm; db - min.:21.2 mm; Calculation factor - f2C:1.03; Calculation factor - f2B:1.01; Calculation factor f1:1; Calculation factor f2A:1; da min.:21.2 mm; db max.:23.5 mm; Calculation factor - f:1; Calculation factor f:1.03; |
| Belt Tensioner Assembly Fits: Hyundai & Kia V6 3.3L 3.5L 3.8L | Mass(kg):4.90; Cr:66.3; Bore Diameter (mm):355,6; C:25,4 mm; Width (mm):25,4; Bearing No.:KGC140; d:355,6 mm; Outer Diameter (mm):406,4; Basic dynamic load rating (C):66,3 kN; Bearing number:KGC140; C0r:112; D:406,4 mm; r:2 mm; r(min):2; B:25,4 mm; Size (mm):355.6x406.4x25.4; Weight:4,9 Kg; |
| OE Quality Belt Tensioner for Chevy S10 LLV GMC Sonoma Isuzu Hombre 94-97 38187 | Bearing number:RNA49/22; Bore Diameter (mm):28; Fw:28 mm; C:17 mm; Outer Diameter (mm):39; Width (mm):17; Size (mm):28x39x17; D:39 mm; |
| Timing Belt Kit Tensioner Water Pump Fit 02-06 Audi 3.0L DOHC 30V AVK BGN | m:12,7 kg / Weight; D:215 mm; Bearing number:2320-K-M-C3 + H2320; Cr:196000 N / Dynamic l; Size (mm):90x215x73; Y2:2,58; l:97 mm; d1H:90 mm; e:0,38; Outer Diameter (mm):215; Da max:201 mm; Y1:1,67; Width (mm):73; d:100 mm; da max:114 mm; db min:110 mm; m1:2,2 kg / Weight, ada; c:20 mm; nB:5200 1/min / Referen; D1:183 mm; |
| SKP 73FQ22R Accessory Belt Tensioner Fits 2011-2019 Ford Explorer 3.5L V6 GAS | Bearing number:LM8S; Basic dynamic load rating (C):0,17 kN; Size (mm):8x15x11.5; B:11,5 mm; Weight:0,011 Kg; D1:14,3 mm; D:15 mm; Bore Diameter (mm):8; Width (mm):11,5; W:1,1 mm; Outer Diameter (mm):15; L:17 mm; d:8 mm; |
| Tensioner Adjuster Adjuster for 04-11 Chrysler Dodge Avenger 300 SOHC 24v 3.5 | Component:Assembly; rb max.:2 mm; db(max):103; Calculation factor (Y0):0,79; Weight / Kilogram:2.862; ra max.:2 mm; Y1:1.43; Manufacturer Name:KOYO; r2 min.:2 mm; UNSPSC:31171516; da(min):102; Product Group:B04334; r(min):2.5; r1(min):2; a(mm):32.6; Number of Tapered Rows:Single Row; Category:Tapered Roller Beari; Db min.:150 mm; Bearing number:30218JR; (Refer.)Mass(kg):2.65; |
| Belt Tensioner & Pulley Assembly for Acura 02-14 Honda CR-V 2.0L 2.3L 2.4L | Size (mm):7x11x3; Width (mm):3; d:7 mm; D:11 mm; B:3 mm; Bore Diameter (mm):7; Basic dynamic load rating (C):0,455 kN; Basic static load rating (C0):0,202 kN; Bearing number:SMR117-2Z; C:3 mm; Outer Diameter (mm):11; |
| HONDA Genuine CR-V Accord Belt Tensioner Assembly 31170-PNA-023 | Outer Diameter (mm):190; C:73 mm; Weight:6 Kg; Bearing number:SL14 928; Bore Diameter (mm):140; d:140 mm; Size (mm):140x190x73; Basic dynamic load rating (C):370 kN; D:190 mm; Basic static load rating (C0):830 kN; Width (mm):73; B:73 mm; |
| Timing Belt Water Pump Kit V-Belt Hydraulic Tensioner for Hyundai Kia 2.5L 2.7L | Weight:2,8 Kg; F:89 mm; Width (mm):35; Basic static load rating (C0):224 kN; Outer Diameter (mm):150; B:35 mm; Size (mm):70x150x35; Bearing number:NJ314-E-M6; C:35 mm; Bore Diameter (mm):70; r2 min.:2,1 mm; D:150 mm; S:1,7 mm; d:70 mm; r3 min.:2,1 mm; r4 min.:2,1 mm; r1 min.:2,1 mm; Basic dynamic load rating (C):229 kN; |
| Timing Belt Valve Cover Water Pump Fit 96-01 Acura Honda CR-V B18B1 B20B4 B20Z2 | C:51 mm; Basic static load rating (C0):220 kN; D:310 mm; Bore Diameter (mm):200; d:200 mm; Width (mm):51; Size (mm):200x310x51; Basic dynamic load rating (C):225 kN; (Grease) Lubrication Speed:1700 r/min; Bearing number:7040 B; Weight:13,5 Kg; a:132 mm; Outer Diameter (mm):310; B:51 mm; |
| No. | Brand | d | e | r | H | J | A | N | L |
| 1pc | - | 50.8mm | - | - | - | - | - | - | - |
| V6 | - | 280 mm | - | - | - | - | - | - | - |
| Listing03 | - | 40 mm | - | - | - | 105 mm | 40 mm | 15 mm | 137 mm |
| 73FQ22R | - | 8 mm | - | - | - | - | - | - | 17 mm |
| A4 | - | - | - | - | - | - | - | - | - |
| Z06 | - | 25 mm | - | - | - | - | - | - | - |
| V6 | - | 65 mm | - | 2.1 mm | - | - | - | - | - |
| 91-99 | Dodge | 35,000 mm | - | - | - | - | - | - | - |
| 3.5L | - | 38 mm | - | - | - | - | - | - | - |
| T100 | - | 220 mm | - | - | - | - | - | - | - |
| 3.5L | - | 25mm | - | - | - | - | - | - | - |
| 4.6L | - | 100mm | - | - | - | - | - | - | - |
| 04-11 | Dodge | - | - | - | - | - | - | - | - |
| 2006-2011 | - | - | - | - | - | - | - | - | - |
| V6 | - | 120 mm | - | - | - | - | - | - | - |
| V6 | - | - | - | - | - | - | - | - | - |
| 3.4L/V6 | - | - | - | 0,3 mm | - | - | - | - | - |
| 1.8L | - | 60mm | - | - | - | - | - | - | - |
| 2002-2014 | - | 30 mm | - | - | - | - | - | - | - |
| V6 | - | 7 mm | - | - | - | - | - | - | - |
| S10 | - | - | - | - | - | - | - | - | - |
| V6 | - | 12 mm | - | - | - | - | - | - | - |
| 2011-2014 | - | 530 mm | - | - | - | - | - | - | - |
| 2 | - | 150mm | - | - | - | - | - | - | - |
| 3.5L | - | 70 mm | - | - | - | - | - | - | - |
| S60 | - | - | - | - | - | - | - | - | - |
| LS1/LS2/LS3 | - | 30 mm | - | - | - | - | - | - | - |
| 2x | - | 105 mm | - | - | - | - | - | - | - |
| 91107 | - | - | - | - | - | - | - | - | - |
V-Belt & Tensioner & Idler Pulley Kit for 2011-2014 Hyundai Kia 2.0L 2.4L⭐⭐⭐⭐⭐ Video
Proper V-belt Tensioning & why does it matter? - Motion+Drives
Aug 5, 2020 — If a belt has too little tension, it could result in a multitude of issues, including; slippage, excess heat, and premature belt and pulley wear ...
Measuring Belt Tension - Greenheck
This article discusses several methods for measuring the belt tension for V-belts commonly used in HVAC applications. Tensioning the belt is often done.
How to Tension a V-Belt - It Still Runs
Check the tension of the belt by pushing inward on the belt with your hands. The belt should have no more than a 1/2 inch of slack to be properly tensioned.
Belt Tension Calculator - Gates
Proper belt tension ensures optimum performance of a vehicle's accessory belt drive system. Select from the dropdown options below to find the appropriate ...
Installation, Tensioning & Maintenance of V-Belts
Improper belt tension is the leading cause of premature belt failure and increased costs. Under-tensioned belts lead to slippage, overheating, excessive pulley ...
Tensioning belt drives | Plant Engineering
Mar 1, 1999 — The most common method for drive tensioning is “force deflection.” A predetermined force is applied to the open span of the belt drive (Fig. 2).
How to Tension a V-Belt (& How Not to)
Feb 5, 2018 — The proper tension is the lowest tension at which the belt won't slip or squeal under peak load. However, there is still a wide range of tension ...
V Belt Tension Methods & Instructions: Easily Align Pulleys
Using a spring scale, press down on the belt in the approximate center of the span, and deflect the belt to the desired level. When the desired deflection ...
proper belt tensioning - Bestorq
V-belts operate on friction; the friction is multiplied by the mechanical advantage of the wedging principle. Correct V-Belt tensioning is the single.