| Timing Belt Tensioner Hydraulic for Honda Accord Acura V6 Engine 14520-RCA-A01 | da min:35 mm; Fatigue limit load, Cu:0.51 kN; d1:37.9 mm; f0:13.8; Characteristic outer ring frequency, BPF0:3.57 Hz; D1:55.1 mm; Size (mm):30x62x16; Characteristic rolling element frequency, BSF:4.62 Hz; C:16,000 mm; B:16,000 mm; Nlim:7,600 rpm; Static load, C0:11.3 kN; Width (mm):16,000; Da max:57 mm; Mass:0.2 kg; Radial clearance class:C3; da max:37.9 mm; Min operating temperature, Tmin:-40 °C; |
| Drive Belt Tensioner for 2001-2006 Mitsubishi Montero 3.5L 3.8L V6 6G74 6G75 | Weight / Kilogram:0.11; Harmonized Tariff Code:8482.99.65.30; Outer Diameter (mm):58; Number of Rows of Rollers:Single Row; Bore Diameter (mm):50; Thrust Bearing:No; Outside Diameter:2.283 Inch | 58 Mill; Weight:0,113 Kg; Manufacturer Name:IKO; Closed End:Not Applicable; Long Description:50MM Bore; 58MM Outs; Bearing number:KT 505835; Enclosure:Not Applicable; Noun:Roller Assembly; Separable:No; Minimum Buy Quantity:N/A; |
| Timing Belt+Water Pump Kit Camry/Sienna V6 3.0 3.3 Seals Pulley Tensioner Gasket | Bore Diameter (mm):65; Basic static load rating (C0):59,5 kN; Weight:2.13 Kg; Bearing number:6313UU; Size (mm):65x140x33; Basic dynamic load rating (C):92,5 kN; Outer Diameter (mm):140; B:33 mm; D:140 mm; Width (mm):33; C:33 mm; d:65 mm; r:2.1 mm; |
| Katech Belt Tensioner LS1/LS2/LS3 (Corvette/Camaro/CTS-V/GTO/G8) - KAT-A4425 | (Grease) Lubrication Speed:6400 r/min; Width (mm):23,812; Angle (α):25 °; d:30 mm; B:23,812 mm; Basic static load rating (C0):21,3 kN; Size (mm):30x62x23.812; D:62 mm; Basic dynamic load rating (C):29,7 kN; Outer Diameter (mm):62; C:23,812 mm; Weight:0,29 Kg; Bearing number:5206; Bore Diameter (mm):30; |
| V6 Trucks TIMING BELT+WATER PUMP KIT Hydraulic Ten Genuine +OE Parts FOR TOYOTA | B:2,5 mm; r min.:0,1 mm; Category:Roller Bearings; da max:8,1 mm; Basic static load rating (C0):0,269 kN; Outer Diameter (mm):11; (Oil) Lubrication Speed:47 000 r/min; C:2,5 mm; Bore Diameter (mm):7; Basic dynamic load rating (C):0,555 kN; Da max.:10,2 mm; ra max.:0,1 mm; Inventory:0.0; Minimum Buy Quantity:N/A; Size (mm):7x11x2.5; Weight:0,67 Kg; D:11 mm; (Grease) Lubrication Speed:40 000 r/min; da min.:7,8 mm; |
| Timing Belt Kit Water Pump Fit 88-92 Toyota Pickup 3.0L V6 3VZE | D:340 mm; Size (mm):200x340x140; Width (mm):140; B:140 mm; Bearing number:24140W33; C:140 mm; Outer Diameter (mm):340; d:200 mm; Bore Diameter (mm):200; |
| V-Belt & Tensioner & Idler Pulley Kit for 2011-2014 Hyundai Kia 2.0L 2.4L⭐⭐⭐⭐⭐ | Basic static load rating (C0):2750 kN; C:72 mm; Basic dynamic load rating (C):1170 kN; Outer Diameter (mm):650; Width (mm):72; Weight:54 Kg; d:530 mm; Bore Diameter (mm):530; Fw:560,5 mm; (Grease) Lubrication Speed:900 r/min; Bearing number:NUP28/530; D:650 mm; Size (mm):530x650x72; B:72 mm; |
| 3.4L/V6 Complete Timing Belt Water Pump Kit with genuine Thermostat + Hyd Tens. | Bore Diameter (mm):7; Basic dynamic load rating (C):2,74 kN; Bearing number:RNAO7X14X8TN; C:8 mm; Ew:10 mm; (Grease) Lubrication Speed:28000 r/min; Outer Diameter (mm):10; r:0,3 mm; D:14 mm; Weight:0,007 Kg; Width (mm):8; Fw:7 mm; Size (mm):7x10x8; Basic static load rating (C0):2,44 kN; |
| Toyota Tacoma V6 Serpentine Drive Belt Tensioner Kit Genuine OE OEM | Width (mm):23; Weight:0,046 Kg; C:22 mm; Da max.:22 mm; Basic static load rating (C0):20,4 kN; Size (mm):12x24x23; da max:15 mm; Bearing number:NA 6901UU; B:23 mm; Basic dynamic load rating (C):15,6 kN; Outer Diameter (mm):24; da min.:14 mm; F:16 mm; r min.:0,3 mm; D:24 mm; Bore Diameter (mm):12; d:12 mm; |
| Belt Tensioner Assembly Fits: Hyundai & Kia V6 3.3L 3.5L 3.8L | Mass(kg):4.90; Cr:66.3; Bore Diameter (mm):355,6; C:25,4 mm; Width (mm):25,4; Bearing No.:KGC140; d:355,6 mm; Outer Diameter (mm):406,4; Basic dynamic load rating (C):66,3 kN; Bearing number:KGC140; C0r:112; D:406,4 mm; r:2 mm; r(min):2; B:25,4 mm; Size (mm):355.6x406.4x25.4; Weight:4,9 Kg; |
| ALT TENSIONER Belt Tensioner Assembly For Cadillac CTS Chevy Camaro 6.2 V8 39334 | d:45 mm; A1:16 mm; Bearing number:UCST209H1S6; H1:102 mm; A:49 mm; A2:34 mm; S:19 mm; H2:74 mm; Bore Diameter (mm):45; N:29 mm; L2:14 mm; Weight:2,1 Kg; H:117 mm; Basic dynamic load rating (C):27,8 kN; L1:85 mm; L:137 mm; N1:20 mm; L3:66 mm; B:49,2 mm; N2:49 mm; |
| For Ford F-150 DAYCO Accessory Drive Belt Tensioner Pulley 4.6L 5.4L V8 kh | Bearing number:350769; d1:800 mm; d:600 mm; Basic dynamic load rating (C):676 kN; D:800 mm; Bore Diameter (mm):600; Weight:117 Kg; Size (mm):600x800x90; H:90 mm; Width (mm):90; D1:610 mm; Outer Diameter (mm):800; |
| HONDA Genuine CR-V Accord Belt Tensioner Assembly 31170-PNA-023 | Outer Diameter (mm):190; C:73 mm; Weight:6 Kg; Bearing number:SL14 928; Bore Diameter (mm):140; d:140 mm; Size (mm):140x190x73; Basic dynamic load rating (C):370 kN; D:190 mm; Basic static load rating (C0):830 kN; Width (mm):73; B:73 mm; |
| Timing Belt Water Pump Tensioner Kit Fits Saturn Vue 3.5L V6 SOHC | Size (mm):200x420x138; ra:4; C0:2760; D:420 mm; da:220; Bore Diameter (mm):200; C:138 mm; TSR rpm:1300; db max.:247 mm; DI_:253; r1:5; dd min:283; db min:220 mm; Basic static load rating (C0):2760 kN; DE_:369; dc min:263; DA_:58; d:200 mm; hidTable:ecat_NSCLDR; Da max.:400 mm; |
| Set of 2 Belt Tensioner Assembly Fit Toyota Camry 2010-2011 | Dynamic Load Rating (kN):630; Seals or Shields:Open Type; D:225mm; Reference Speed Rating (r/min):2210; Limiting Speed Rating (r/min):3400; d:150mm; Cage Type:Plastic; Fatigue Load Rating (kN):85; Clearance:C4; Availability:In Stock; Static Load Rating (kN):880; B:56mm; SKU:23030-e1-tvpb-c4-fag; Weight:0.02 KGS; |
| Belt Tensioner Assembly for Honda Pilot Odyssey Accord 3.5L V6 2005-2011 Pulley | Manufacturer Item Number:7314 BECBP; Calculation factor - Y2:0.93; Fatigue load limit - Pu:3.9 kN; Noun:Bearing; Calculation factor kr:0.1; da min.:82 mm; Other Features:Normal Axial Interna; D1 ≈:121.5 mm; rb - max.:1 mm; Minimum Buy Quantity:N/A; d:70 mm; Bearing number:7314 BECBP; Width (mm):35; Basic static load rating C0:98 kN; Cage Material:Polymer; Calculation factor - Y0:0.26; Calculation factor - X:0.57; |
| No. | Brand | d | e | r | H | J | A | N | L |
| 3.5L | - | 70 mm | - | - | - | - | - | - | - |
| V6 | - | 280 mm | - | - | - | - | - | - | - |
| 2001-2006 | - | - | - | - | - | - | - | - | - |
| 3.5L | - | 25mm | - | - | - | - | - | - | - |
| 97-04 | - | - | - | - | - | - | - | - | - |
| 4.6L | - | 100mm | - | - | - | - | - | - | - |
| S10 | - | - | - | - | - | - | - | - | - |
| 2x | - | 105 mm | - | - | - | - | - | - | - |
| 31170-PNA-023 | - | 140 mm | - | - | - | - | - | - | - |
| 2 | - | 150mm | - | - | - | - | - | - | - |
| V6 | - | - | - | - | - | - | - | - | - |
| 3.5L | - | 200 mm | - | - | - | - | - | - | - |
| V6 | - | 12 mm | - | - | - | - | - | - | - |
| 2006-2011 | - | - | - | - | - | - | - | - | - |
| 02-06 | - | 100 mm | 0,38 | - | - | - | - | - | - |
| F-150 | - | 600 mm | - | - | 90 mm | - | - | - | - |
| Z06 | - | 25 mm | - | - | - | - | - | - | - |
| Fits:OEM#16620-0V020 | - | - | - | - | - | - | - | - | - |
| 04-11 | Dodge | - | - | - | - | - | - | - | - |
| 1.8L | - | 60mm | - | - | - | - | - | - | - |
Belt Tensioner & Pulley Assembly for Acura 02-14 Honda CR-V 2.0L 2.3L 2.4L Video
How to Tension a V-Belt (& How Not to)
Feb 5, 2018 — The proper tension is the lowest tension at which the belt won't slip or squeal under peak load. However, there is still a wide range of tension ...
Belt Tension Calculator - Gates
Proper belt tension ensures optimum performance of a vehicle's accessory belt drive system. Select from the dropdown options below to find the appropriate ...
V Belt Tension Methods & Instructions: Easily Align Pulleys
Using a spring scale, press down on the belt in the approximate center of the span, and deflect the belt to the desired level. When the desired deflection ...
Proper V-belt Tensioning & why does it matter? - Motion+Drives
Aug 5, 2020 — If a belt has too little tension, it could result in a multitude of issues, including; slippage, excess heat, and premature belt and pulley wear ...
Measuring Belt Tension - Greenheck
This article discusses several methods for measuring the belt tension for V-belts commonly used in HVAC applications. Tensioning the belt is often done.
proper belt tensioning - Bestorq
V-belts operate on friction; the friction is multiplied by the mechanical advantage of the wedging principle. Correct V-Belt tensioning is the single.
Installation, Tensioning & Maintenance of V-Belts
Improper belt tension is the leading cause of premature belt failure and increased costs. Under-tensioned belts lead to slippage, overheating, excessive pulley ...
Tensioning belt drives | Plant Engineering
Mar 1, 1999 — The most common method for drive tensioning is “force deflection.” A predetermined force is applied to the open span of the belt drive (Fig. 2).
How to Tension a V-Belt - It Still Runs
Check the tension of the belt by pushing inward on the belt with your hands. The belt should have no more than a 1/2 inch of slack to be properly tensioned.