| Katech Belt Tensioner LS1/LS2/LS3 (Corvette/Camaro/CTS-V/GTO/G8) - KAT-A4425 | (Grease) Lubrication Speed:6400 r/min; Width (mm):23,812; Angle (α):25 °; d:30 mm; B:23,812 mm; Basic static load rating (C0):21,3 kN; Size (mm):30x62x23.812; D:62 mm; Basic dynamic load rating (C):29,7 kN; Outer Diameter (mm):62; C:23,812 mm; Weight:0,29 Kg; Bearing number:5206; Bore Diameter (mm):30; |
| HONDA Genuine CR-V Accord Belt Tensioner Assembly 31170-PNA-023 | Outer Diameter (mm):190; C:73 mm; Weight:6 Kg; Bearing number:SL14 928; Bore Diameter (mm):140; d:140 mm; Size (mm):140x190x73; Basic dynamic load rating (C):370 kN; D:190 mm; Basic static load rating (C0):830 kN; Width (mm):73; B:73 mm; |
| Belt Tensioner & Pulley Assembly for Acura 02-14 Honda CR-V 2.0L 2.3L 2.4L | Size (mm):7x11x3; Width (mm):3; d:7 mm; D:11 mm; B:3 mm; Bore Diameter (mm):7; Basic dynamic load rating (C):0,455 kN; Basic static load rating (C0):0,202 kN; Bearing number:SMR117-2Z; C:3 mm; Outer Diameter (mm):11; |
| Timing Belt Kit Water Pump Fit 88-92 Toyota Pickup 3.0L V6 3VZE | D:340 mm; Size (mm):200x340x140; Width (mm):140; B:140 mm; Bearing number:24140W33; C:140 mm; Outer Diameter (mm):340; d:200 mm; Bore Diameter (mm):200; |
| 2x New A/C Drive Belt Tensioner Pulley For 2006-2008 Suzuki Grand Vitara 2.7L-V6 | ra max.:2.5 mm; Reference speed:6300 r/min; ra - max.:2.5 mm; D:225 mm; da max.:140.9 mm; d1:141.5 mm; D2:193.35 mm; Bore Diameter (mm):225; da - max.:140.9 mm; Fatigue load limit - Pu:5.1 kN; Outer Diameter (mm):105; Calculation factor - f0:13; d:105 mm; Da - max.:211 mm; Bearing number:6321-2Z; Calculation factor kr:0.03; Basic static load rating - C0:153 kN; B:49 mm; Calculation factor f0:13.2; |
| SKP 73FQ22R Accessory Belt Tensioner Fits 2011-2019 Ford Explorer 3.5L V6 GAS | Bearing number:LM8S; Basic dynamic load rating (C):0,17 kN; Size (mm):8x15x11.5; B:11,5 mm; Weight:0,011 Kg; D1:14,3 mm; D:15 mm; Bore Diameter (mm):8; Width (mm):11,5; W:1,1 mm; Outer Diameter (mm):15; L:17 mm; d:8 mm; |
| Engine Belt Tensioner Assembly w/ Pulley for Honda Accord Odyssey Pilot V6 3.5L | Basic dynamic load rating (C):925 kN; Weight:29,3 Kg; B:100 mm; Basic static load rating (C0):2200 kN; d:280 mm; Bearing number:NN4956 K; Size (mm):280x380x100; C:100 mm; Width (mm):100; D:380 mm; (Grease) Lubrication Speed:1400 r/min; Outer Diameter (mm):380; Bore Diameter (mm):280; |
| Serpentine Belt Tensioner w/ Pulley NEW for Audi A4 A6 S4 VW Passat V6 | Calculation factor - f2D:1.05; Preload class D:53 N/micron; r1,2 min.:0.6 mm; d2:24.1 mm; Calculation factor - f0:8.5; Ball - Dw:7.144 mm; Fatigue load limit Pu:0.176 kN; D2:34.4 mm; db - min.:21.2 mm; Calculation factor - f2C:1.03; Calculation factor - f2B:1.01; Calculation factor f1:1; Calculation factor f2A:1; da min.:21.2 mm; db max.:23.5 mm; Calculation factor - f:1; Calculation factor f:1.03; |
| Belt Tensioner Assembly for Honda Pilot Odyssey Accord 3.5L V6 2005-2011 Pulley | Manufacturer Item Number:7314 BECBP; Calculation factor - Y2:0.93; Fatigue load limit - Pu:3.9 kN; Noun:Bearing; Calculation factor kr:0.1; da min.:82 mm; Other Features:Normal Axial Interna; D1 ≈:121.5 mm; rb - max.:1 mm; Minimum Buy Quantity:N/A; d:70 mm; Bearing number:7314 BECBP; Width (mm):35; Basic static load rating C0:98 kN; Cage Material:Polymer; Calculation factor - Y0:0.26; Calculation factor - X:0.57; |
| Set of 2 Belt Tensioner Assembly Fit Toyota Camry 2010-2011 | Dynamic Load Rating (kN):630; Seals or Shields:Open Type; D:225mm; Reference Speed Rating (r/min):2210; Limiting Speed Rating (r/min):3400; d:150mm; Cage Type:Plastic; Fatigue Load Rating (kN):85; Clearance:C4; Availability:In Stock; Static Load Rating (kN):880; B:56mm; SKU:23030-e1-tvpb-c4-fag; Weight:0.02 KGS; |
| For Honda CR-V Accesory Belt Tensioner 2002-2014 Automatic Part Number: 89321 | Width (mm):28; d:30 mm; Bore Diameter (mm):30; Size (mm):30x72x28; D:72 mm; Outer Diameter (mm):72; B:28 mm; Bearing number:10/330PZ; |
| 1pc Serpentine Drive Belt Tensioner For 1990-1992 Benz 400 500 W140 W124 C140 | d:50.8mm; Dynamic Load Rating (kN):54.7; D:85mm; Availability:In Stock; B:17.462mm; SKU:set-121-timken; Static Load Rating (kN):67.5; Weight:0.36 KGS; |
| V6 Trucks TIMING BELT+WATER PUMP KIT Hydraulic Ten Genuine +OE Parts FOR TOYOTA | B:2,5 mm; r min.:0,1 mm; Category:Roller Bearings; da max:8,1 mm; Basic static load rating (C0):0,269 kN; Outer Diameter (mm):11; (Oil) Lubrication Speed:47 000 r/min; C:2,5 mm; Bore Diameter (mm):7; Basic dynamic load rating (C):0,555 kN; Da max.:10,2 mm; ra max.:0,1 mm; Inventory:0.0; Minimum Buy Quantity:N/A; Size (mm):7x11x2.5; Weight:0,67 Kg; D:11 mm; (Grease) Lubrication Speed:40 000 r/min; da min.:7,8 mm; |
| New Listing03 04 05 06 Infiniti G35 FX Alternator P/S Belt Tensioner Adjuster Bolt 3.5L V6 | S:19 mm; Basic dynamic load rating (C):34,1 kN; Weight:2,4 Kg; Basic static load rating (C0):21,3 kN; A2:22 mm; d:40 mm; A0:52,2 mm; A1:14 mm; Bolt (G):1/2; L:137 mm; Bearing number:UCFX08E; N:15 mm; A:40 mm; J:105 mm; Bore Diameter (mm):40; B:49,2 mm; |
| OE Quality Belt Tensioner for Chevy S10 LLV GMC Sonoma Isuzu Hombre 94-97 38187 | Bearing number:RNA49/22; Bore Diameter (mm):28; Fw:28 mm; C:17 mm; Outer Diameter (mm):39; Width (mm):17; Size (mm):28x39x17; D:39 mm; |
| Timing Belt Kit Water Pump Tensioner for 91-99 Mitsubishi 3000GT Dodge 3.0L V6 | Characteristic rolling element frequency, BSF:4.61 Hz; da min:41.5 mm; Outer Diameter (mm):72,000; Characteristic cage frequency, FTF:0.4 Hz; Characteristic outer ring frequency, BPF0:3.56 Hz; D:72,000 mm; d:35,000 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.44 Hz; Bearing number:6207HVZZ; Bore Diameter (mm):35,000; rs min:1.1 mm; Da max:65.5 mm; Nref:10,000 rpm; |
| No. | Brand | d | e | r | H | J | A | N | L |
| 02-06 | - | 100 mm | 0,38 | - | - | - | - | - | - |
| V6 | - | - | - | - | - | - | - | - | - |
| 3.5L | - | 38 mm | - | - | - | - | - | - | - |
| 4.6L | - | 100mm | - | - | - | - | - | - | - |
| 91-99 | Dodge | 35,000 mm | - | - | - | - | - | - | - |
| 97-04 | - | - | - | - | - | - | - | - | - |
| 3.5L | - | 25mm | - | - | - | - | - | - | - |
| T100 | - | 220 mm | - | - | - | - | - | - | - |
| 2.5L | - | 70 mm | - | - | - | - | - | - | - |
| 31170-PNA-023 | - | 140 mm | - | - | - | - | - | - | - |
| V8 | - | 130 mm | - | - | - | - | - | - | - |
| 2002-2014 | - | 30 mm | - | - | - | - | - | - | - |
| S10 | - | - | - | - | - | - | - | - | - |
| 96-01 | - | 200 mm | - | - | - | - | - | - | - |
| S60 | - | - | - | - | - | - | - | - | - |
| V6 | - | 12 mm | - | - | - | - | - | - | - |
| F-150 | - | 600 mm | - | - | 90 mm | - | - | - | - |
| 04-11 | Dodge | - | - | - | - | - | - | - | - |
| 2001-2006 | - | - | - | - | - | - | - | - | - |
| 2011-2014 | - | 530 mm | - | - | - | - | - | - | - |
| 91107 | - | 120 mm | - | - | - | - | - | - | - |
| 02-14 | - | 7 mm | - | - | - | - | - | - | - |
| 6.2 | - | 45 mm | - | - | 117 mm | - | 49 mm | 29 mm | 137 mm |
V-Belt & Tensioner Kit for 04-10 Sonata Tiburon Tucson Optima Sportage 2.7L⭐⭐⭐⭐⭐ Video
How to Tension a V-Belt - It Still Runs
Check the tension of the belt by pushing inward on the belt with your hands. The belt should have no more than a 1/2 inch of slack to be properly tensioned.
Measuring Belt Tension - Greenheck
This article discusses several methods for measuring the belt tension for V-belts commonly used in HVAC applications. Tensioning the belt is often done.
proper belt tensioning - Bestorq
V-belts operate on friction; the friction is multiplied by the mechanical advantage of the wedging principle. Correct V-Belt tensioning is the single.
Installation, Tensioning & Maintenance of V-Belts
Improper belt tension is the leading cause of premature belt failure and increased costs. Under-tensioned belts lead to slippage, overheating, excessive pulley ...
How to Tension a V-Belt (& How Not to)
Feb 5, 2018 — The proper tension is the lowest tension at which the belt won't slip or squeal under peak load. However, there is still a wide range of tension ...
V Belt Tension Methods & Instructions: Easily Align Pulleys
Using a spring scale, press down on the belt in the approximate center of the span, and deflect the belt to the desired level. When the desired deflection ...
Tensioning belt drives | Plant Engineering
Mar 1, 1999 — The most common method for drive tensioning is “force deflection.” A predetermined force is applied to the open span of the belt drive (Fig. 2).
Belt Tension Calculator - Gates
Proper belt tension ensures optimum performance of a vehicle's accessory belt drive system. Select from the dropdown options below to find the appropriate ...
Proper V-belt Tensioning & why does it matter? - Motion+Drives
Aug 5, 2020 — If a belt has too little tension, it could result in a multitude of issues, including; slippage, excess heat, and premature belt and pulley wear ...